measuring cylinder
英 [ˈmeʒərɪŋ ˈsɪlɪndə(r)]
美 [ˈmeʒərɪŋ ˈsɪlɪndər]
量筒
双语例句
- The measuring cylinder of inflator is made of304 stainless steel materials.
充气机计量缸是由304不锈钢材料制成。 - Touch the switch preparation, after topping up air measuring cylinder and buret, adjust the button "Sulfur to the zero" to the "0.000" the last number could not be0.
点一下准备，待量气筒、滴定管液面加满调“硫调零”，显示“0.000”最后一位千分位可以不为0。 - High-Precision On-Line Measuring System for Cylinder Diameter with Large Range
高精度圆柱直径大量程在线测量系统 - The utility model belongs to a measuring appliance, in particular to a precision measuring cylinder used for measuring the volume of an irregular solid.
本实用新型属于测量器具，尤其涉及测量不规则固体体积的精确量筒。 - Two methods of settlement experiment of slurry in the measuring cylinder in the Lab are introduced.
介绍了实验室用量筒进行矿浆沉降试验的两种方法，分析比较了两种方法的优缺点。 - A Study on Equipment of Intelligent Capacitance Measuring Wear of Cylinder Bore of Auto Engine
智能型电容式发动机缸套磨损测量仪的研究 - Research on Measuring Method of Maximum Cylinder Compression Pressure for Multi-cylinder Diesel Engine
多缸柴油机最大气缸压缩压力测试方法研究 - The robot must be able to operate without touching the measuring cylinder.
机器人运行时不能碰到用于测量的圆柱体。 - Pour exactly100ml of sulphuric acid into a measuring cylinder.
将100ml的硫酸倒入量筒。 - As cost of traditional method of measuring cylinder deformation is high, it is presented that the simulating cylinder head is substituted for the real cylinder head, and 6 different cylinder heads are selected to test on a 6-cylinder engine.
针对测量发动机缸筒变形的传统方法成本较高的问题，提出了在测量过程中采用模拟缸盖代替真实缸盖的方法，并选用6种不同的缸盖，在某6缸发动机上进行了试验研究。 - Secondly, the testing device was introduced for simultaneously measuring cylinder pressure.
其次介绍了同时测量四缸汽油机各缸气缸压力的试验装置。 - Besides, the relationship among volumetric efficiency, amount of injected fuel and indicated mean pressure is studied by measuring pressures in cylinder and fuel pipe.
此外，本文还通过测量气缸压力和油管压力，研究了充气效率、供油量和平均指示压力之间的关系。 - Design of Straightness Measuring Instrument of Cylinder
液压缸缸筒直线度测量仪的设计 - Development of transducer for measuring cylinder liner temperature of marine diesel engine
船舶柴油机气缸套温度测量传感器的研制 - The engine life can be predicted through measuring the cylinder pressure and the feasibility was verified through analyzing 100 units of diesel engine.
对100台柴油机的测量后分析表明该方法是可行的。 - A new method of measuring cylinder pressure
一种测量气缸压力的新方法 - A New Method for Measuring Cylinder Pressure of a Reciprocating Compressor
测取往复压缩机气缸压力的新方法 - In this paper theoretical analysis and experimental study were made for the errors arising from measuring cylinder pressure in internal combustion engines.
摘要本文对内燃机气缸压力测量中的测压通道误差进行了理论分析和试验研究。 - This paper introduced the methods of measuring cylinder ring gauge inner diameter with optics sensitive lever on all-purpose tool microscope. And an evaluation of analysis to the uncertainty of measuring methods is made.
本文介绍在万能工具显微镜上用光学灵敏杠杆测量圆柱环规内径的方法，并对该测量方法的不确定度进行分析评定。 - On-line automatic measuring system for cylinder block based on the air-electric sensor technology
基于气电转换的发动机缸体在线测量系统 - Passage Error in Measuring Cylinder Pressure
气缸压力的测压通道误差 - Measurer Study for Axiality Measuring of Compressor Cylinder
压缩机气缸同轴度测量仪的研制 - A new scheme is introduced for measuring cylinder linearity error-two point method.
采用一种测量圆柱体轴线直线度误差的新方案&两点测量法。 - The Standard of the Measuring Cylinder in Particle Size Analysis Test& Its Gauging Calibration
颗粒分析用量筒的规格标准和计量标定 - This new measuring method with three dimension coordinate measuring and data processing can be utilized not only for measuring cylinder bore surface but also for parts with cylindrical surface such as the inner and outer cylindrical surface of cylinder sleeve and crankshaft journals.
这种三坐标测量加数据处理的新测量方法，不仅适于测量缸体的内孔，还可用于测量缸套的内、外圆柱面及曲轴主轴颈等一般圆柱形形体。 - The capacitive method and the principle of sensor for micro-nanometer wearing measurement are described. Capacitance value calculation of the special plate capacitive sensor for measuring cylinder bore wearing thickness and signal processing method are discussed in detail. Initial experimental testing results are analyzed.
叙述了微/纳米级磨损测量研究的电容方法和传感器原理，重点论述对汽车发动机气缸套磨损测量的特殊平行板电容传感器电容值计算和信号处理方法，给出了初步的实验测试结果与分析。 - It is shown that, for a 6-cylinder engine, the simulating cylinder head of a 40 mm-thick steel plate with holes ( the 3rd cylinder head) can be substituted for the real cylinder on measuring cylinder deformation.
研究结果表明，对于该6缸发动机，在测量其缸筒变形量时，可采用40mm钢板挖孔的模拟缸盖（第3种缸盖）代替真实缸盖。 - Methods for settlement experiment of slurry in the measuring cylinder testing
量筒内进行矿浆沉降试验的方法 - Choose piezoelectric pressure sensor measuring cylinder gas pressure; choose the angle encoder to measure converter motor speed and crank angle; made K-type thermocouple measurements required temperature data. 4.
选用压电式压力传感器测量缸内气体压力；选用转角编码器测量变频电机转速与曲轴转角；制作了K型热电偶测量所需的温度数据。